当前位置:文库下载 > 所有分类 > 工程科技 > 机械/仪表 > PA66 RCL-4036 物性表
侵权投诉

PA66 RCL-4036 物性表

PA66 RCL-4036 物性表

LNP* Lubricomp* Compound RCL36Americas: COMMERCIAL

Also known as: LNP* Lubricomp* Compound RCL-4036 Product reorder name: RCL36

LNP* Lubricomp* RCL36 is a compound based on Nylon 66 resin containing PTFE, Carbon Fiber. Added features of this material include: Internally Lubricated,Electrically Conductive.

YPICAL PROPERTIES ¹

ECHANICAL

ensile Stress, breakensile Strain, break

ensile Modulus, 50 mm/minlexural Stresslexural Modulusensile Stress, breakensile Strain, break

ensile Modulus, 1 mm/minlexural Stresslexural Modulus

TYPICAL VALUEUNITSTANDARD

18500.933040037901877002451.8226003962270010810101406810255>2401.380.50.1

kgf/cm²%

kgf/cm²kgf/cm²kgf/cm²MPa%MPaMPaMPacm-kgf/cmcm-kgf/cmcm-kgfcm-kgfkJ/m²kJ/m²°C°Cg/cm³%%

ASTM D 638

ASTM D 638ASTM D 638ASTM D 790ASTM D 790ISO 527ISO 527ISO 527ISO 178ISO 178ASTM D 4812ASTM D 256ASTM D 3763ISO 6603ISO 180/1UISO 180/1AASTM D 648ISO 75/AfASTM D 792ASTM D 570ASTM D 955

MPACT

Izod Impact, unnotched, 23°CIzod Impact, notched, 23°C

Instrumented Impact Energy @ peak, 23°Cultiaxial Impact

Izod Impact, unnotched 80*10*4 +23°CIzod Impact, notched 80*10*4 +23°C

HERMAL

DT, 1.82 MPa, 3.2mm, unannealed

DT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm

HYSICAL

ensity

oisture Absorption, 50% RH, 24 hrsold Shrinkage, flow, 24 hrs

1) Typical values only. Variations within normal tolerances are possible for variose colours.All values aremeasured at least after 48 hours storage at 230C/50% relative humidity.

All properties, expect the melt volume rate are measured on injection moulded samples.All samples are prepared according to ISO 294.

2) Only typical data for material selection purpose.Not to be used for part or tool design.

3) This rating is not intended to reflect hazards presented this or any other material under actual fire conditions.4) Own measurement according to UL.

Source, GMD, Last Update:09/26/2008

PLEASE CONTACT YOUR LOCAL SALES OFFICE FOR AVAILABILITY IN YOUR AREA DISCLAIMER : THE MATERIALS, PRODUCTS AND SERVICES OF SABIC INNOVATIVE PLASTICS HOLDING BV, ITS

SUBSIDIARIES AND AFFILIATES ("SELLER"), ARE SOLD SUBJECT TO SELLER'S STANDARD CONDITIONS OF SALE, WHICH CAN BE FOUND AT http://www.wenkuxiazai.com.AND ARE AVAILABLE UPON REQUEST.ALTHOUGH ANY INFORMATION OR RECOMMENDATION CONTAINED HEREIN IS GIVEN IN GOOD FAITH, SELLER MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT THE RESULTSDESCRIBED HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING SELLER'S PRODUCTS,SERVICES OR

RECOMMENDATIONS. EXCEPT AS PROVIDED IN SELLER'S STANDARD CONDITIONS OF SALE, SELLER SHALL NOT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF ITS PRODUCTS ORSERVICES DESCRIBED HEREIN.Each user is responsible for making its own determination as to the suitability of Seller's products, services or recommendations for the user's particular use through appropriate end-use testingand analysis. Nothing in any document or oral statement shall be deemed to alter or waive any provision of Seller's Standard Conditions of Sale or this Disclaimer,unless it is specifically agreed to in a writing signed Seller. Nostatement Seller concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right of Seller or as a recommendation for theuse of such product, service or design in a manner that infringes any patent or other intellectual property right.* LNP is a trademark of SABIC INNOVATIVE PLASTICS HOLDING BV* Lubricomp is a trademark of SABIC INNOVATIVE PLASTICS HOLDING BV

第1页

猜你喜欢

返回顶部